Skip to product information
1 of 6


Applicator Wand Heat Gun for Hot fix Hotfix Rhinestone

Applicator Wand Heat Gun for Hot fix Hotfix Rhinestone

Regular price $27.30 AUD
Regular price Sale price $27.30 AUD
Sale Sold out

Hot Fix Crystals / Rhinestones

  • Professional hotfix applicator
  • Works on most types of crystals/studs/nail beads!
  • Ergonomically designed handle. Comfortable rubberized grip
  • On/Off switch for more convenient
  • lt Heats up in 2 minutes.
  • Includes 7 precision interchangeable tips
  • Universal voltage: 110 V / 220V / 230V / 240V. 
  • * Rhinestones are not included in this sale.
  • Important: If you are using fine rhinestones with short base plate (ie: Swarovski art. 2038) on a delicate fabric surface (ie Lycra), please make sure you only use the flat head spot to heat the rhinestone, so that the tip doesn't touch directly to the fabric. 
sizes of the 7 tips:
ss6 =2mm , ss10=3mm , ss16=4mm, ss20=5mm , ss34=7mm , 4mm flat hot spot , 9mm flat hot spot
Dimension: 18.5 x 4 x 2.6cm. cable: 108cm length.
Here is an instruction of how to apply Hot fix crystals:
  1. Lay your garment out flat on a heat-resistant surface with the side to be rhinestoned facing up.
  2.  If the item has multiple layers, such as a T-shirt, place a piece of cardboard between the layers or inside the shirt. This will keep the glue from melting through and sticking to the back of the shirt.
  3. Place your Hot Fix crystals glue side on the fabric. Lay out a small part of your design at a time, such as a 2 x 2-inch square, to avoid messing up the crystals in neighbouring areas of the garment.
  4. Heat the iron on the lowest setting. Gently press it on top of the Hot Fix crystals for 15 to 20 seconds.
  5. Allow the crystals to cool for one minute. Gently pull on one to see if it is fully affixed. If not, iron again for 20 seconds. Repeat the process until your design is complete.
View full details